COMPANY PROFILE
PRODUCTS
SPECIALS
REPAIR SERVICES
CONTACT US
HOME PAGE

INSTRUMENTS
MAJESTIC PLIERS
BAR ONE PLIERS
TUFF STEEL PLIERS
VIP PLIERS
CHAMPION PLIERS
HEMOSTATS
SCALERS & EXPLORERS
TWEEZERS
OTHER


BRACKETS
BANDS & TUBES
BONDING SUPPLIES
WIRE
ELASTOMERICS
IMPRESSION SUPPLIES
XRAY PRODUCTS
EMERGENCY KITOTHER

VIP Pliers

 

 

DISTAL END CUTTER SAFETY HOLD     
Slim Handle #V113.                                   Tapered handle and mini head allows easy access to posterior areas. Cuts and holds all types of wires without fraying. Cuts and holds braided, rectangular, square and round wires up to .025"
 

 

DISTAL END CUTTER SAFETY HOLD     Standard Handle #V100                                        Long Handle #V107                                              Cuts and securely holds distal ends up to .025". these pliers cut multi-strand, braided, rectangular, square and round wires without fraying. Cuts within 1/2mm of buccal tube.

 

 

 

DISTAL END CUTTER FLUSH CUT 
Slim Handle #V112                                   Standard Handle #V102                                        Long Handle #V109                                         This top quality plier cuts and holds wire flush to tube. Cuts and holds wires up to .018" X.022" and .0175 coaxial.
 

 

DISTAL END CUTTER FLUSH CUT & HOLD         V-STYLE 
Standard Handle #V111                                  Slim Handle #V114.                                              Long Handle #V110                                          This V-Style design cuts and holds with a positive stop on the wire. Very limited range. Tip Measure: Round .014"-.018" Square .018"x.022"
 

 

DISTAL END CUTTER FLUSH CUT NO HOLD Standard Handle #V106
This top quality plier cuts and holds wire flush to tube. Cuts and holds wires up to .018" X.022" and .0175 coaxial.
 

 

PIN & LIGATURE CUTTER                                  Slim Handle #V202                                           Long Handle #V210    
Features smaller head and very fine tips. Ideal when intricate snipping is required. Cuts up to .014" soft wire.

 

 

 

PIN & LIGATURE CUTTER 15°                       Slim Handle #V202A
Plier head is angled 15° from the vertical for better visibility. Also allows you to easily work from anterior to posterior. Cuts .010" - .014" Soft wires.
 

 

STANDARD PIN & LIGATURE CUTTER     Standard Handle #V200
Ideal for cutting all types of soft wire. Diamond honed edges last longer. Cuts up to .014" soft wire.
 

 

STANDARD LIGATURE CUTTER 15° ANGLE  Standard Handle #V200A
Same design as our Mini on a standard size forgung. Cuts .010" 0 .020 Soft wires.
 

 

HARD WIRE CUTTER                                          Standard Handle #V205                  
This very durable and long lasting cutter cuts cleanly and effortlessly. Cuts round, square, rectangular and braided wire to .022" x .028"
 

 

45° ANGLED LIGATURE CUTTER                        Standard Handle #V208     
45° degree angled tip allows easy access to ligature wire under bracket wing. Small head will not impinge on the tip or check. Cuts up to .014" soft wire.
 

 

PIN PLACING PLIER
This plier has very finely tapered tips to allow easy placement of many attachments. Non-slip jaw finish insures from grip without damaging wires.
 

 

LIGHT WIRE PLIER     Non Grooved     Standard Handle #V803                               This plier features tapered tips pefect for intricate bends. Round on flat tips provide the best quality in bends. Smooth beaks are great for bending light wires. bends round, square and rectangular wire up to .020" Tip Measure: Round .025" Square .025"
 

 

LIGHT WIRE PLIER     Grooved 
Precision tapered tips allow intricate detail work on archwires. Tip sizes is .025. Wire Range: Round .012" - .020" Square .016" x .022"
 

 

LIGHT WIRE PLIER WITH CUTTER               Non Grooved                                                 Standard Handle #V805
Same features as the S 204, but combines a diamond-honed cutter to allow bending and cutting with one plier. Cuts & bends round, square and rectangular wire up to .020"
Tip Measure: Round .025" Square .025"
 

 

LIGHT WIRE PLIER WITH CUTTER                    2 Tip Grooves      
Grooved for round wires at 1mm & 2mm from tip. Bend and cut with one plier. Cuts & bends round, square and rectangular wire up to .020"
Tip Measure: Round .025" Square .025
 

 

JARABAK PLIER                                    Standard Handle #V434
Long tapered design with fine detail work on serrated tips allows for intricate bends and utility work. Tip sizes are .028" for round and half moon. Wire range: Round .012" - .020" Square .022" x .028"
 

 

JARABAK PLIER WITH CUTTER                         Standard Handle #V434C                                     
Similar to #V434 with the addition of a cutter at base of jaws. Allows you to cut and bend with the same instrument. Tip sizes are .028" for round and half moon. Wire range: Round .012" - .020" Square .022" x .028"
 

 

CLASSIC BIRD BEAK                             Standard Handle #V800
This plier is great for bending round, square and rectangular wire up to .030". Excellent for chair side as well as laboratory use. Features round on square beaks.
Tip Measure: Round .035" Square .035"
 

 

CLASSIC BIRD BEAK WITH CUTTER        Standard Handle #V802
Same as #V800 with the addition of a diamond honed anvil cutter. Cuts and bends round, square and rectangular wire up to .030".
Tip Measure: Round .035" Square .035"
 

 

BIRD BEAK SERRATED                          Standard Handle #V807
Fantastic wire control with non-slipping serration on entire side of sqaure surface. Tapered beaks, round on rectangular. Bends round, square and rectangular wire up to .030".
Tip Measure: Round .028" Square .035"
 

 

HOW PLIER                                            Standard Handle #V426
4mm serrated tips provide maximum wire gripping without harming patient's lips. Ideal for grapsing all types of auxiliary attachments for fast and safe insertions. Holds round, square and rectangular wire up to .022" x .028"
 

 

STOP V-BEND PLIER                              Standard Handle #V425
Place a 1mm stop with one squeeze, automatic and easy. Tested on all types of stainless steel, chrome cobalt and Australian wire. Bends round, square and rectangular wire up to .022".
 

 

STOP PLIER FOR NICKEL TITANIUM      Standard Handle #V425NT
Stop Niti wire from sliding through buccal tubes. Place a stop on niti wires without distortion or breakage. Smooth rounded edges will not mar or fracture wire. Just one squeeze places a 1mm stop. Bends round, square and rectangular wire up to .022".
 

 

TWEED ARCH PLIER STANDARD JAW     Standard Handle #V404S
For torquing and bending without nicking or marring. Thin jaw measures .050" wide. Parallel .020" at opening. Bends round, square and rectangular wire up to .022" x .028"
 

 

TWEED ARCH PLIER SHORT JAW          Standard Handle #V404
Thin jaw measures .050" wide, Parallel .020" at opening. Great for detailing archwires or placing offset bends. Bends round, square and rectangular wire up to .022" X .028"
 

 

THREE PRONG PLIER                            Standard Jaws #V307                                     Thin Jaws #V308                                                  Lab Jaws #V310
Great for fabricating lab appliances or to activate archwires. Works with round, square and rectangular wire up to .036"
 

 

TWEED LOOP/OMEGA PLIER 
Replaceable tip measures .045", .060" and .070" in diameter. Bends consistent omega loops in three sizes. Bends round, square and rectangular wire up to .022" X .028"
Tip Measure: Round .045" Concave .100"
 

 

ARCH CONTOURING PLIER
Grooves measure .016", .018" and .022" respectively. Used for lingual retainers. Hawley bows, or to expand or contract an archwire. Bends round, square and rectangular wire up to .022"
 

 

STRAIGHT BRACKET REMOVER            Standard Handle #V400                                      
Easily pop off brackets by holding the face of the bracket in a horizontal position and slightly applying pressure by torquing or turning in a clockwise motion.
ANGLED BRACKET REMOVER               Standard Handle #V401
Angled head makes debonding posterior brackets easy.

 
ADAMS PLIER 
Easily fabricate Adams clasps with square on suare beaks. Ideal for wire bending and clasps. Bends round wire up to .030"
Tip measure: Square .035"
 

 

WEINGART PLIER                                      Standard Handle #V456                            Standard Handle Delicate Tips #V453
Serrated tips hold wire firmly. Narrow beaks make cinching easy. bends & holds round square and rectangular wire up to .022" x .028"
 

 

DETAILING PLIER 
Place a step in any direction in the mouth, save time when you require a simple bayonet, first order bend or stepping the wire up or down. Chose from 1mm, .75mm or .5mm steps. Bends round, square and rectangular wire up to .022" x .028"
 

 

HEAVY WIRE BIRD BEAK SERRATED 
Great for lab size wires. Square tip is serrated for secure grip. Bends wire up to 0.56"
Tip Measure: Round .045" Square .055"
 

 

POSTERIOR BAND REMOVER 
Standard Handle #V410                            Posterior band remover has an inserted tip which is designed to wedge under the band while the replaceable teflon tip rests on the occlusial surface for easy band removal.
 

 

ADHESIVE REMOVING PLIER                             Standard Handle #V420
Replaceable carbide tip #V420TC                          Tip design allows access to remove adhesive practically anywhere in the mouth. Double-ended carbide tip is replaceable as well as the heat sterilizeable pad.