Mid Atlantic Ortho

Untitled Document

Featured Products

> Instruments

> Repair Services

> Handpieces

> Brackets

> Trim/Finishing Burs

> Bands/Tubes

> Bonding

> Wire

> Elastomerics

> Impression Materials

> Ultrasonic Solution

> Sterilization Equip.

> Miscellaneous

Untitled Document

Instruments Selection

> Ultimate Pliers

> Bar One Pliers

> VIP Pliers

> Miscellaneous

> Duraline

> Hemostats

> Scalers

> Tweezers

> Scissors

> Gauges

> Bite Sticks

> Cheek Retractors

> Separating Pliers

> Cement Spatula

VIP Pliers

DISTAL END CUTTER SAFETY HOLD
Tapered handle and mini head allows easy access to posterior areas. Cuts and holds all types of wires without fraying. Cuts and holds braided, rectangular, square and round wires up to .025"

DISTAL END CUTTER SAFETY HOLD
Cuts and securely holds distal ends up to .025". these pliers cut multi-strand, braided, rectangular, square and round wires without fraying. Cuts within 1/2mm of buccal tube.

DISTAL END CUTTER FLUSH CUT
This top quality plier cuts and holds wire flush to tube. Cuts and holds wires up to .018" X.022" and .0175 coaxial.

DISTAL END CUTTER FLUSH CUT & HOLD
V-STYLE
This V-Style design cuts and holds with a positive stop on the wire. Very limited range. Tip Measure: Round .014"-.018" Square .018"x.022"

DISTAL END CUTTER FLUSH CUT
NO HOLD
This top quality plier cuts and holds wire flush to tube. Cuts and holds wires up to .018" X.022" and .0175 coaxial.

PIN & LIGATURE CUTTER
Features smaller head and very fine tips. Ideal when intricate snipping is required. Cuts up to .014" soft wire.

PIN & LIGATURE CUTTER 15°
Plier head is angled 15° from the vertical for better visibility. Also allows you to easily work from anterior to posterior. Cuts .010" - .014" Soft wires..

STANDARD PIN & LIGATURE CUTTER
Ideal for cutting all types of soft wire. Diamond honed edges last longer. Cuts up to .014" soft wire.

STANDARD LIGATURE
CUTTER 15° ANGLE
Same design as our Mini on a standard size forgung. Cuts .010" 0 .020 Soft wires.

HARD WIRE CUTTER
This very durable and long lasting cutter cuts cleanly and effortlessly. Cuts round, square, rectangular and braided wire to .022" x .028"

45° ANGLED LIGATURE CUTTER
45° degree angled tip allows easy access to ligature wire under bracket wing. Small head will not impinge on the tip or check. Cuts up to .014" soft wire.

PIN PLACING PLIER
This plier has very finely tapered tips to allow easy placement of many attachments. Non-slip jaw finish insures from grip without damaging wires.

LIGHT WIRE PLIER NON GROOVED
This plier features tapered tips pefect for intricate bends. Round on flat tips provide the best quality in bends. Smooth beaks are great for bending light wires. bends round, square and rectangular wire up to .020" Tip Measure: Round .025" Square .025"

LIGHT WIRE PLIER GROOVED
Precision tapered tips allow intricate detail work on archwires. Tip sizes is .025. Wire Range: Round .012" - .020" Square .016" x .022"

LIGHT WIRE PLIER WITH CUTTER
NON GROOVED
Same features as the S 204, but combines a diamond-honed cutter to allow bending and cutting with one plier. Cuts & bends round, square and rectangular wire up to .020" Tip Measure: Round .025" Square .025"

LIGHT WIRE PLIER WITH CUTTER
2 TIP GROOVES
Grooved for round wires at 1mm & 2mm from tip. Bend and cut with one plier. Cuts & bends round, square and rectangular wire up to .020" Tip Measure: Round .025" Square .025

JARABAK PLIER
Long tapered design with fine detail work on serrated tips allows for intricate bends and utility work. Tip sizes are .028" for round and half moon. Wire range: Round .012" - .020" Square .022" x .028"

JARABAK PLIER WITH CUTTER
Similar to #V434 with the addition of a cutter at base of jaws. Allows you to cut and bend with the same instrument. Tip sizes are .028" for round and half moon. Wire range: Round .012" - .020" Square .022" x .028"

CLASSIC BIRD BEAK
This plier is great for bending round, square and rectangular wire up to .030". Excellent for chair side as well as laboratory use. Features round on square beaks.
Tip Measure: Round .035" Square .035"

CLASSIC BIRD BEAK WITH CUTTER
Same as #V800 with the addition of a diamond honed anvil cutter. Cuts and bends round, square and rectangular wire up to .030". Tip Measure: Round .035" Square .035

BIRD BEAK SERRATED
Fantastic wire control with non-slipping serration on entire side of sqaure surface. Tapered beaks, round on rectangular. Bends round, square and rectangular wire up to .030". Tip Measure: Round .028" Square .035"

HOW PLIER
4mm serrated tips provide maximum wire gripping without harming patient's lips. Ideal for grapsing all types of auxiliary attachments for fast and safe insertions. Holds round, square and rectangular wire up to .022" x .028"

STOP V-BEND PLIER
Place a 1mm stop with one squeeze, automatic and easy. Tested on all types of stainless steel, chrome cobalt and Australian wire. Bends round, square and rectangular wire up to .022".

STOP PLIER FOR NICKEL TITANIUM
Stop Niti wire from sliding through buccal tubes. Place a stop on niti wires without distortion or breakage. Smooth rounded edges will not mar or fracture wire. Just one squeeze places a 1mm stop. Bends round, square and rectangular wire up to .022".

TWEED ARCH PLIER STANDARD JAW
For torquing and bending without nicking or marring. Thin jaw measures .050" wide. Parallel .020" at opening. Bends round, square and rectangular wire up to .022" x .028"

TWEED ARCH PLIER SHORT JAW
Thin jaw measures .050" wide, Parallel .020" at opening. Great for detailing archwires or placing offset bends. Bends round, square and rectangular wire up to .022" X .028"

THREE PRONG PLIER
Great for fabricating lab appliances or to activate archwires. Works with round, square and rectangular wire up to .036"

TWEED LOOP/OMEGA PLIER
Replaceable tip measures .045", .060" and .070" in diameter. Bends consistent omega loops in three sizes. Bends round, square and rectangular wire up to .022" X .028"
Tip Measure: Round .045" Concave .100"

ARCH CONTOURING PLIER
Grooves measure .016", .018" and .022" respectively. Used for lingual retainers. Hawley bows, or to expand or contract an archwire. Bends round, square and rectangular wire up to .022"

STRAIGHT BRACKET REMOVER
Easily pop off brackets by holding the face of the bracket in a horizontal position and slightly applying pressure by torquing or turning in a clockwise motion.

ANGLED BRACKET REMOVER
Angled head makes debonding posterior brackets easy.

ADAMS PLIER
Easily fabricate Adams clasps with square on suare beaks. Ideal for wire bending and clasps. Bends round wire up to .030"
Tip measure: Square .035"

WEINGART PLIER
Serrated tips hold wire firmly. Narrow beaks make cinching easy. bends & holds round square and rectangular wire up to .022" x .028"

DETAILING PLIER
Place a step in any direction in the mouth, save time when you require a simple bayonet, first order bend or stepping the wire up or down. Chose from 1mm, .75mm or .5mm steps. Bends round, square and rectangular wire up to .022" x .028"

HEAVY WIRE BIRD BEAK SERRATED
Great for lab size wires. Square tip is serrated for secure grip. Bends wire up to 0.56" Tip Measure: Round .045" Square .055"

POSTERIOR BAND REMOVER
Posterior band remover has an inserted tip which is designed to wedge under the band while the replaceable teflon tip rests on the occlusial surface for easy band removal.

ADHESIVE REMOVING PLIER
Tip design allows access to remove adhesive practically anywhere in the mouth. Double-ended carbide tip is replaceable as well as the heat sterilizeable pad.

Untitled Document